醫療級PARA塑膠原料,醫療級聚丙烯酰胺塑膠原料,醫療級PARA Ixef® HC-1022是東莞市雙幫塑膠原料有限公司常年銷售的塑料,因為塑料價格行情每天都有新變化前天的報價不等于今天的報價。本公司銷售的所有原料保證是原廠原包,隨料可以提供生產廠商提供的物性表、SGS報告,COA原料出廠報告,REACH報告,SVHC報告,UL黃卡,提供原料注塑加工工程中可能出現的各種異,F象解決方法,塑料牌號太多,本網站沒有提供的本公司也有代理,詳情請咨詢本公司相關業務人員0769-87795123 13549213581 肖生 QQ:15397858 微信:13549213581
醫療級PARA, 醫療/護理用品, 醫療器械, 醫療器材, ISO 10993, 玻璃纖維增強材料50%,輻射消毒, 電子束消毒, 環氧乙烷消毒, 抗伽馬輻射, 生物兼容性
Ixef® HC-1022
聚丙烯酰胺
Solvay Specialty Polymers
Technical Data
產品說明
Ixef® HC-1022 is a 50% glass-fiber reinforced, general purpose polyarylamide compound that exhibits very high strength and rigidity, outstanding surface gloss, and excellent creep resistance.
Ixef® HC-1022 shows no evidence of cytotoxicity, sensitization, intracutaneous reactivity or systemic toxicity based on biocompatibility testing as defined by ISO 10993:1. Solvay offers these materials for healthcare applications that require limited exposure (less than 24 hours) to the body.
• Black: HC-1022 BK 000
• Black: HC-1022 BK 001
• Natural: HC-1022 NT 000
• Gray: HC-1022 GY51
• Additional colors available
• Custom colorable
總體
材料狀態 • 已商用:當前有效
資料 1 • Technical Datasheet
UL 黃卡 2 • E95746-101887930
搜索 UL 黃卡 • Solvay Specialty Polymers
• Ixef®
供貨地區 • 北美洲 • 拉丁美洲 • 亞太地區
• 非洲和中東 • 歐洲
填料/增強材料 • 玻璃纖維增強材料, 50% 填料按重量
• 超強剛性 • 輻射消毒 • 流動性高
• 尺寸穩定性良好 • 高強度
特性 • 出色的外觀 • 好的消毒性 • 耐化學性良好
• 低吸濕性 • 環氧乙烷消毒 • 生物兼容性
• 電子束消毒 • 抗伽馬輻射 • 通用
• 放射性可透的 • 良好的抗蠕變性
用途 • 高光應用 • 牙齒應用領域 • 醫療器材
• 外科器械 • 醫療/護理用品 • 醫療器械
機構評級 • ISO 10993 3
RoHS 合規性 • RoHS 合規
外觀 • 黑色 • 可用顏色
• 灰色 • 自然色
形式 • 粒子
加工方法 • 注射成型
物理性能 干燥 調節后的 單位制 測試方法
密度 1.64 -- g/cm³ ISO 1183
收縮率 0.10 到 0.30 -- % ISO 294-4
吸水率 (24 hr, 73°F (23°C)) 0.16 -- % ISO 62
吸水性 - Equil, 65% RH 1.50 -- 內部方法
Ixef® HC-1022
聚丙烯酰胺
Solvay Specialty Polymers
機械性能 干燥 調節后的 單位制 測試方法
拉伸模量 2.83E+6 2.83E+6 psi ISO 527-2
(19500) (19500) (MPa)
拉伸應力 (斷裂) 40600 37700 psi ISO 527-2
(280) (260) (MPa)
拉伸應變 (斷裂) 1.9 2.2 % ISO 527-2
彎曲模量 2.68E+6 -- psi ISO 178
(18500) (MPa)
彎曲應力 55100 -- psi ISO 178
(380) (MPa)
沖擊性能 干燥 調節后的 單位制 測試方法
懸壁梁缺口沖擊強度 2.1 -- ft•lb/in ASTM D256
(110) (J/m)
無缺口懸臂梁沖擊 16 -- ft•lb/in ASTM D256
(850) (J/m)
熱性能 干燥 調節后的 單位制 測試方法
熱變形溫度 (264 psi (1.8 MPa), 未退火) 446 -- °F ISO 75-2/A
(230) (°C)
線形熱膨脹系數 - 流動 8.3E-6 -- in/in/°F ISO 11359-2
(1.5E-5) (cm/cm/°C)
注射 干燥(英制) 干燥(公制)
干燥溫度 248°F 120°C
干燥時間 0.50 到 1.5hr 0.50 到 1.5hr
料筒后部溫度 482 到 500°F 250 到 260°C
料筒前部溫度 500 到 554°F 260 到 290°C
射嘴溫度 500 到 554°F 260 到 290°C
加工(熔體)溫度 536°F 280°C
模具溫度 248 到 284°F 120 到 140°C
注射速度 快速 快速
注射說明
Hot runners: 250°C to 260°C (482°C to 500°F)
Storage
Ixef® compounds are shipped in moisture-resistant packages at moisture levels according to specifications. Sealed, undamaged bags should be preferably stored in a dry room at a maximum temperature of 50°C (122°F) and should be protected from possible damage. If only a portion of a package is used, the remaining material should be transferred into a sealable container. It is recommended that Ixef® resins be dried prior to molding following the recommendations found in this datasheet and/or in the Ixef® processing guide.
Drying
The material as supplied is ready for molding without drying. However, If the bags have been open for longer than 24 hours, the material needs to be dried. When using a desiccant air dryer with dew point of -28°C (-18°F) or lower, these guidelines can be followed: 0.5-1.5 hour at 120°C (248°F), 1-3 hours at 100°C (212°F), or 1-7 hours at 80°C (176°F).
Injection Molding
Ixef® HC-1022 compound can be readily injection molded in most screw injection molding machines. A general purpose screw is recommended, with minimum back pressure.
The measured melt temperature should be about 280°C (536°F), and the barrel temperatures should be around 250 to 260°C (482 to 500°F) in the rear zone, gradually increasing to 260 to 290°C (500 to 554°F) in the front zone. If hot runners are used, they should be set to 250 to 260°C (482 to 500°F).
To maximize crystallinity, the temperature of the mold cavity surface must be held between 120 and 140°C (248 and 284°F). Molding at lower temperatures will produce articles that may warp, have poor surface appearance, and have a greater tendency to creep. Set injection pressure to give rapid injection. Adjust holding pressure and hold time to maximize part weight. Transfer from injection to hold pressure at the screw position just before the part is completely filled (95-99%).
醫療級PARA塑膠原料,醫療級聚丙烯酰胺塑膠原料,醫療級PARA Ixef® HC-1022是東莞市雙幫塑膠原料有限公司常年銷售的塑料,因為塑料價格行情每天都有新變化前天的報價不等于今天的報價。本公司銷售的所有原料保證是原廠原包,隨料可以提供生產廠商提供的物性表、SGS報告,COA原料出廠報告,REACH報告,SVHC報告,UL黃卡,提供原料注塑加工工程中可能出現的各種異,F象解決方法,塑料牌號太多,本網站沒有提供的本公司也有代理,詳情請咨詢本公司相關業務人員0769-87795123 13549213581 肖生 QQ:15397858 微信:13549213581
|